MODEL YJ800M/ML HIGH SPEED ELECTRON CONTROLLED DRAW DOUBLING TEXTURING MACHIN 144/168/192/216/240/264/288 spindle

Main Datas

Use

This machine is used to make the polypropylene fiber to be low, middle and high stretch fiber through twister. if equipped with intermingle nozzle, this machine can make intermingle filber.

Feature

1.Model YJ80OM/ML texturing machine is our company rests on the market the characteristic, has referred to the domestic and foreign most advanced texturing technology and made by ourselves, this machine can not only make the polyester low stretch, can also make the polyester fiber and polyamide fiber and other not hot moment yarn, the mainly point is optimized the silk path, reduced the yarn in the producing process winding and the friction, reduced the damage between silk path to the silk, reduced the heroin powder and the broken yarn production, thus satisfied the user to produce the thin and porous silk request. Moreover the user can choose intermingle parts to make intermingle fiber. This machine has achieved a machine multipurpose function. The products enhance one time, is domestic, the international original creation,

2. It adopts imported timing belt and transducer, every important bearing adopt imported or famous brand products, three bearing installed shake-reducing ring, reduce the machine s shake and noise, improved the machines capability.

3. It adopts the twister which is flexible and reliable, the. speed can reach 14400rpm, and can choose 6mm and 9mm two type of friction disk, is suitable for different type of fiber.

4. It adopts special system of groove bobbin and precise electronic control, that realizes the precise take-up, effectively prevents
overlapping. Y J800MS have the stroke finishing system, solved the bobbin both sides hard-edge problem, assure the bobbin forming good and the withdraw rolling smoothly.

Technology requirement

1.When install the machine, the height deviation of longitudinal ground should be less than
8mm, the cross should be less than 5mm.
2.The depth of ground base should accord the soil situation.
3.This ground foot drawing is for 48 spindles （2 pitches ), the length of one pitch is 1640mm.

1. Original yarn frame 2. Original yarn 3. I roller 4.
Deforming heater 5. Cooling track 6. Twister
7. IIroller 8. Setting heater 9. Ⅲ roller 10. Treadle
plate 11. Upper oiling roller 12. Take-up

• Draw-Texturing(Dty Machines)